|
|
Post by david on Oct 10, 2021 14:29:24 GMT 1
I built an extension on my house in the UK some 20 years ago. Hard work shifting 4 cubic metres of cement when your partner does not turn
up!
Always chucked a few broken bricks in the hired mixer to clean it out. Now I am just thinking what the professional cement makers do with their ginormous trucks to clean out a 15 ton wagon. I am sure someone on here knows. I certainly do not. No broken bricks in their wagons!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 10, 2021 16:05:57 GMT 1
1. Tell her to get out of bed  2. Lots of water and, more importantly, constant use. Perhaps being slightly helpful - Lots of washing up liquid? |
|
|
|
Post by beejay on Oct 10, 2021 16:07:36 GMT 1
I built an extension on my house in the UK some 20 years ago. Hard work shifting 4 cubic metres of cement when your partner does not turn
up!
Always chucked a few broken bricks in the hired mixer to clean it out. Now I am just thinking what the professional cement makers do with their ginormous trucks to clean out a 15 ton wagon. I am sure someone on here knows. I certainly do not. No broken bricks in their wagons!
Normally, the drum is washed out to clean it.
In my past life I was part of a team that demonstrated a manufacturer's trucks to potential customers. One truck was cement mixer and during a demonstration it got bogged down in a field. Concrete mix goes off very quickly if the drum stops turning and by the time a suitable recovery truck was located it had gone solid. Hammer and chisel job to clean that drum. |
|
Aardvark
Non-gamer
Living in soggy 22 and still wondering what's going on.
Posts: 1,442
|
Post by Aardvark on Oct 10, 2021 18:01:37 GMT 1
I have always poured water and a few handfuls of gravel into it as soon as my last mix has been tipped out, then let it run for a while. Not a few days/weeks/months later.
|
|
|
|
Post by ForumUser2 on Oct 10, 2021 18:29:02 GMT 1
I used to use a pressure washer as soon as the mixing job was finished.
|
|
ibis
Banned Member
Posts: 1,376
|
Post by ibis on Oct 10, 2021 18:51:40 GMT 1
I have been in the yard when a driver who was very slow had his cement dry in the drum and it was his responsibility to climb in and jack hammer or hammer and chisel it out. A big chuck fell and snapped his leg... Took the ambulance service and firefighters ages to get him secure and out.
|
|
|
|
Post by Dominic Best on Oct 10, 2021 19:36:45 GMT 1
The only time I’ve been involved with a readymix delivery here in France part of the bill was for the time it took the driver to put the drum through a cleaning routine before leaving.
|
|
|
|
Post by houpla on Oct 10, 2021 20:19:48 GMT 1
I kept our cement mixers immaculate during 18 months daily use, just using a hose and brush. The ready-mix lorries washed out their drums into the ditch at the side of our chemin. Not eco-friendly, but it did mean less fauchage for the Mairie  |
|
|
|
Post by david on Oct 11, 2021 12:57:06 GMT 1
Thanks for the answers everyone. I just wonder how the larger concrete companies get rid of their cement mixed water. Surely not just in to the ground?
|
|
ibis
Banned Member
Posts: 1,376
|
Post by ibis on Oct 11, 2021 14:21:03 GMT 1
Surely not just in to the ground? Sadly, yes.. |
|
|
|
Post by flober on Oct 11, 2021 16:15:57 GMT 1
Many firms have land that they own which is just for that purpose.Some have concrete crushing machines which they use to turn the waste into hard core.
|
|
